Various Methods of Pier and Beam Foundation Repair
When it comes to protecting the structural integrity of the house, maintenance is the ultimate key. We all know that the foundation is the base of a house and you have to maintain it properly. If you have no expertise in this field, then repairing the foundation all by yourself can be very dangerous.
Due of this reason, you may not repair the foundation yourself. You may even think to postpone the repair work as it does not cause much trouble. But the damaged foundation worsens the condition over time and you may end up doing the more costly replacement.
However, there are two types of foundation repair available - slab-on-grade foundations and pier and beam foundations. In this foundation, the experts construct a series of footings with concrete bases which can support the load of the house. In this foundation, you may find a crawl space under the house. You must contact a pier and beam foundation repair company to evaluate the current condition if you notice major problems in the foundation.
When Do You Need to Repair the Foundation?
The doors and windows do not open or close properly.
Notice uneven spongy floor.
Cracks in the wall
smells of mold and mildew
Have to pay the high energy bill.
How to Repair Pier and Beam Foundation?
There are many places in the states where the local climate changes every season. You can notice heavy rains which are followed by prolonged drought. The soil of any particular space may have a high content of clay. As you know, clay reacts to dry conditions the same way it reacts to water. As a result, the clay soil underneath the home shrinks and swells and lets the beam shift over time.
If the foundation is shifted, then you may notice cracks in the floors, slabs, walls, and ceilings. The effort to repair the foundation so that it becomes stabilized and strengthened again is needed seamlessly. The most common methods are helical piers, push piers and crawl space support jacks.
1. Push Piers
It is one of the most common repairing methods in this field. The experts drive the resistance push piers deep down under the house until they can find the load-bearing soil. After they are set in the right place, the repair company synchronizes hydraulic jacks which lift the house.
2. Helical Piers
Generally, the experts use this technique for new construction projects, but it can be also used to do lightweight homes settlement. The piers look like screws, therefore, if you turn them into soil, then these can reach the load-bearing strata. After that, the experts synchronize the hydraulic jacks to lift the building back up.
Contact Us
If you suspect any damages and think that the house needs pier and beam foundation repair, then don’t waste time. You can contact Ram Jack and they will come out for a free inspection and repair estimate.